Check Carbon Bikes Before Riding

check-carbon-bikes

Just like any other machinery, check carbon bikes before riding is important. It also requires extensive maintenance at regular intervals. Various parts also need to check, such as carbon wheels(700C), carbon rims, spokes, etc. To ensure that you can maintain your best condition every time you step on a trail or track.

It is important to understand that if a bike is not well taken care of, it can fail in many ways, which can lead to serious injuries and, in some cases, death. Some of the best times for a thorough inspection include:
1. You haven’t used a bike for a while
2. After a long period of riding, because these will cause damage to the bike parts
3. After the new installation
4. Every time you want to make a long intensive trip
Replace worn parts instead of repairing them. The following is a step-by-step guide for checking the content and location of wear and tear during repair, maintenance, and replacement.

Braking System

Starting with the brake levers, make sure they are firmly fixed and the wiring is not worn out at any time. They should also move effortlessly, which means oiling the pivots when necessary. Follow the brake line through the pipe or system accessories. When braking, rotate the wheels individually to see if they stop accordingly. Do the same when riding a bike, and apply an emergency stop at the same time. The bike should be able to stop with full braking without slipping. Ensure that the brake pads are in full contact with the rim when not braking, and in full contact with different levels of braking. Replace worn gaskets accordingly.

carbon-wheelsWheels and tires

When riding a bike, defective wheels and tires are some of the most common causes of accidents. These are repair, but it is better to take the time to replace them. Patches on wheels are never as good as brand new tires. Check the wear of the threads. If the wear exceeds 20% of the tire, replace the tire. The wheels should well align.This allows you to remove the wheels and turn them on the centering machine.

Any shaking or falling should correct to avoid future accidents. Check the spokes to make sure the wheels are not bent or broken. Replace a bent or broken wheel, if the wheel is damage, chip or worn, replace it.
Of course, choosing the right carbon wheels can make your carbon bike twice the result with half the effort. If you are a road cycling enthusiast, the carbon wheels 700C perfectly meets your needs. The lightweight structure and appearance are enough for you to try. Carbon Wheelset 700C Series: 38mm Carbon Wheelset 700C, 38mm Chinese Carbon Wheels 25mm Width etc.

Check carbon bikes

Check whether your bike suspension is broken and the pillars are not scratched. If possible, check and correct excessive oil leakage on the bolts. Small amounts are sometimes normal, but need to supervise. The solid suspension should also test for bending or breakage, and replaced if necessary.
Check the operation of accessories, including electronic equipment, lights, and brackets. Replace any damaged batteries, and replace batteries that are dead or slow down.
Finally, make sure to check the carbon bikes before riding long distances. Adjust the parts, adjust what you need, until you get the perfect feeling.

Leave a Reply

Your email address will not be published.